mousepads
10 posts
• Page 1 of 1
mousepads
by -HaVoC- » Sun Oct 09, 2005 11:19 am
It's a topic that can be visited frequently. We were discussing them for a few minutes last night so I thought I would post a link to the mousepad I got. The reasons I chose this one is because it is the thinnest I have ever seen so my wrist doesn't hurt resting on the edge. So thickness was one point and also it needed to be a durable hard surface that would last without getting stained or peeling. I found this and love it.
Steel Pad homepage
Review of the mouse pad and the steel pads
I've tried many mouse feet enhancements, most of them were tape and horrible after a short time. The pads for the mouse are called steelpad surfers and they are the best. They're super slick and never need cleaning.
After about 6 months what can I say, the combination rocks!
Steel Pad homepage
Review of the mouse pad and the steel pads
I've tried many mouse feet enhancements, most of them were tape and horrible after a short time. The pads for the mouse are called steelpad surfers and they are the best. They're super slick and never need cleaning.
After about 6 months what can I say, the combination rocks!
-
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
by -HaVoC- » Sun Oct 09, 2005 4:16 pm
Well let's look at the specs:
Func pad - 10"x8.5" and 1/8" thick
S&S Steelpad - 12.5"x10.5" and 1/16" thick
The Func 1030 falls short of the S&S Steelpad by 2" on both the length and the width. The Func is also twice as thick. I have used many pads and spent quite sometime looking into this purchase. The 2" around matter and that 1/16" really matters if you spend hours gaming. Match this with the Steelpadz and it's like buttuh.
In a matter of opinion the Func may have what you want, but in a matter of specs there is no comparison here.... next.
Func pad - 10"x8.5" and 1/8" thick
S&S Steelpad - 12.5"x10.5" and 1/16" thick
The Func 1030 falls short of the S&S Steelpad by 2" on both the length and the width. The Func is also twice as thick. I have used many pads and spent quite sometime looking into this purchase. The 2" around matter and that 1/16" really matters if you spend hours gaming. Match this with the Steelpadz and it's like buttuh.
In a matter of opinion the Func may have what you want, but in a matter of specs there is no comparison here.... next.
-
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
- Twister026
-
- Posts: 797
- Joined: Sat Sep 10, 2005 9:28 am
by Twister026 » Sun Oct 09, 2005 5:29 pm
i got a crappy mousepad, guess it is time to get a new one 
.
.by -HaVoC- » Sun Oct 09, 2005 6:38 pm
You grab whatever pad you like and some good teflon skates for the mouse feet and I swear you'll wet your pants with glee.
-
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
by tek » Sun Oct 09, 2005 6:52 pm
G5 and G7 have new pads.. some long ass name poly-something.....Polytetrafluoroethylene.. i looked it up..lol
I have a 518 that I put teflon pads on, and was using a steelpad as well.. Got the G5 and that puppy tracks BETTER on my plain desk AND it skates better.. So GONE are the days of keeping my pad protected for transport to and from the lan parties.. just bring the new G5 or G7 with me.
Not to mention that the pads on the G5/G7 are now just two HUGE pads instead of a bunch of tiny ones.. mmmmm its smooooooooth.
I have a 518 that I put teflon pads on, and was using a steelpad as well.. Got the G5 and that puppy tracks BETTER on my plain desk AND it skates better.. So GONE are the days of keeping my pad protected for transport to and from the lan parties.. just bring the new G5 or G7 with me.
Not to mention that the pads on the G5/G7 are now just two HUGE pads instead of a bunch of tiny ones.. mmmmm its smooooooooth.
by -HaVoC- » Sun Oct 09, 2005 7:23 pm
Not bad Tek. I used my desk for awhile with my MX700. I think the fact it was getting dirty too much made me want to go back to a pad of some sort. However after using the desk I found my first choice back too thick. That's what led my to the 2mm Steelpad.
I'm curious what skates you have. Do they get dirty?
I'm curious what skates you have. Do they get dirty?
-
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
"Now, if things look bad, and it looks like your not going to make it, then you've got to get mean, I mean plum mad dog mean, 'cause if you lose your head and give up then you neither live nor win, and that's just the way it is."
- The Outlaw Josey Wales -
put me on the team that Harry aint on....I sure miss shooting him and if im on the same team as HaVoC...OMFG we will stomp a mudhole in you and walk it dry.
- YaDad -
by tek » Sun Oct 09, 2005 8:21 pm
these are the stock skates on the G5/G7 the polytetra......
when i get home i'll look, but when i went to a lan last week the skates were still clean and that was about a week of ownership on the G5.
mwave won't have stock on the G7 until the 25th or 29th of this month.. once they get stock i'll order it and let you know how it is..
pardon my previous post where i was saying pads were skates and being 10 kinds of confusing there! ;p
when i get home i'll look, but when i went to a lan last week the skates were still clean and that was about a week of ownership on the G5.
mwave won't have stock on the G7 until the 25th or 29th of this month.. once they get stock i'll order it and let you know how it is..
pardon my previous post where i was saying pads were skates and being 10 kinds of confusing there! ;p
- girl
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 18 guests